Tool Free Download OnePlus Oppo Realme via OPLUS EDL

Rafi-Solution24 December 07, 2025

Tool Free Download OnePlus Oppo Realme via OPLUS EDL

Tool Free Download OnePlus Oppo Realme via OPLUS EDL 

The OPLUS EDL Tool (Version 2.0) is a free, GUI-based utility designed to unbrick OnePlus, Oppo, and Realme devices by flashing firmware directly in Emergency Download (EDL) mode. Developed as a successor to command-line tools, it simplifies the process of recovering devices that cannot access the OS or Fastboot by allowing users to read, write, and flash partition files. It supports importing official firmware packages (including merging super partitions) and works with newer chipsets like the Snapdragon 8 Gen 2 (e.g., OnePlus 11), often bypassing the need for authorized accounts which restricted older tools like the MSM Download Tool.

The Step-by-Step Process

Step 1: Open the Tool 
Go to the folder where you extracted the tool and double-click the EXE file (usually named OplusEDL V2) to launch it.

Step 2: Load the Configuration Files

You will see three specific icons for loading files; fill all of them: 

Device Programmer: Select the programmer file (usually an ELF file matching your chipset). 
Digest File: Select the digest file (ELF format).
Sign File: Load the sign.bin file.

Step 3: Load the Firmware
Click the Folder icon to browse for your firmware.

Select the folder where your unbrick firmware is located. 
Crucial Step: When asked to "Merge Super Partition click YES. 
The tool will take about 4–5 minutes to merge these files.

Step 4: Load the Maps

Once merging is done, the tool will show XML files. 
Click All to select every file. 
Click Load to populate partitions (around 65).

Step 5: Connect Your Phone 
Click "Enter Firehose" in the tool. 
Turn off and unplug your phone.
Hold both Volume Up and Volume Down buttons.
While holding, plug in the USB cable. 
The tool should detect your phone and show a COM port. 

Step 6: Flash the Device
Once confirmed in Firehose mode, click "Start Flash.
Tip: Check "Auto Reboot" if you want automatic restart. 
Flashing takes about 15–20 minutes. Step 7: You're Done!

Step 7: You're Done!
When the progress bar finishes and the log says "All operations are now done successfully," your phone is unbricked! It will reboot automatically (if selected) or you can restart manually.  

Download Link 

OplusEDLTool_release_v2.0.1 -



Tags
Rafi-Solution24

Posted by Rafi-Solution24

Post a Comment

0 Comments