Free Download EPSON Adjustment Program For XP - 235, 235A, 332, 335, 332A, 432, 435
🧰 EPSON Adjustment Program – How to Use the Reset Tool
If your Epson printer suddenly stops working and says something like:
“Ink pad is at the end of its service life”
Then you’ve probably landed here searching for a solution.
Good news: You can fix this at home, without going to a repair shop. You just need a reset tool like the one in the image below 👇
🖨️ What Is This Tool?
This is the official-looking Epson Adjustment Program (also called the resetter tool). It’s used to reset the waste ink counter inside your Epson printer.
It’s like telling the printer:
“Don’t worry about the ink pad, let’s keep printing!”
It helps you get rid of that “Service Required” error.
✅ Supported Models in This Tool
This particular version supports these models:
- XP-235
- XP-235A
- XP-332 / XP-335
- XP-332A
- XP-432 / XP-435
If your printer is one of these, this tool will work for you!
🧩 How to Use It – Step by Step
🔹 Step 1: Download the Resetter
- You will receive a ZIP or RAR file.
- Extract it using WinRAR or 7-Zip.
🔹 Step 2: Run the Program
- Double-click on AdjProg.exe
- If needed, right-click and choose Run as Administrator
You’ll see the screen like in the image above.
🔹 Step 3: Select Your Model
- From the Model Name dropdown, choose your printer model (like XP-235 or XP-432).
- Keep Port as "Auto selection" unless you know which port your printer is on.
Click OK.
🔹 Step 4: Enter Adjustment Mode
- After clicking OK, go to “Particular Adjustment Mode”
- Choose “Waste Ink Pad Counter”
🔹 Step 5: Reset the Waste Ink Counter
- Tick the options like:
- ✅ Main pad counter
- ✅ Platen pad counter
- Click Check, then click Initialize
- After the process, it will ask you to turn off your printer.
Just turn it off, wait 5 seconds, and turn it back on.
🎉 Done! Your Printer Is Now Reset
Once done, your printer should be back to normal. No more “Service Required” error. You can now continue printing without issues.
0 Comments