Free Download Samsung Galaxy A03 - A346E BIT U9 Touch Fix File

📱 A346E BIT U9 Touch Fix File Free Download

Touchscreen issue on your Samsung Galaxy A03 (Model: SM-A346E, BIT U9) after flashing or updating? You're in the right place! The A346E_BIT_U9_Touch_Fix_File is a tested and working solution to restore full touch functionality.

✅ Supported Model

📦 File Information

File Name:

A346E_BIT_U9_Touch_Fix_File.7z

• Compressed Size: Varies (15.59 MB depending on compression)

• Inside File:

• boot.img.lz4
• – The essential fix for restoring touch
• Password:
• GSMRK
• (🔐 Required to extract)
• Download Link: Click here
• 📂 Step 2: Extract the File
1. Download
2. A346E_BIT_U9_Touch_Fix_File.7z
3. Use 7-Zip to extract the file.
4. When prompted, enter the password:
5. GSMRK
6. You will get:
7. boot.img.lz4
8. 🧰 Step 3: Convert LZ4 to TAR

Odin does not accept
.lz4

directly, so you need to:

🔧 Flashing Instructions

Follow these steps carefully to apply the Touch Fix:

📥 Step 1: Requirements
 Samsung Galaxy A03 (SM-A346E) with BIT/U9
A PC with Odin Tool installed
Latest Samsung USB Drivers
7-Zip to extract
7.Z



• files
• Original Samsung USB cable
• Use 7-Zip or LZ4 tool to decompress
• boot.img.lz4
• to
• boot.img
• Use any TAR tool (like Odin3 tar packer or 7-Zip) to repack it into
• boot.img.tar


• ⚡ Step 4: Flash with Odin
1. Power off your phone and boot into Download Mode
2. 
   
3. Volume Down + Volume Up → Insert USB cable (or use Volume Down + Bixby + Power)
1. Open Odin Tool
2. Click the AP button and select
3. boot.img.tar
4. Make sure Auto Reboot is checked, and Re-Partition is NOT checked
5. Click Start and wait for the flash to complete
6. The phone will reboot automatically


1. ✅ After Flash Result
2.  ✅ Touch fully working again
3. ✅ No data loss (if only boot is flashed)
4. ✅ Compatible with official firmware


1. 📢 Disclaimer
2. ⚠️ Flashing custom files carries some risk. Always ensure you’re flashing on the correct model and BIT version. We are not responsible for any damage.