Free Download VIVO Y17s Preloader and Scatter File

Free Download VIVO Y17s Preloader and Scatter File

Free Download VIVO Y17s Preloader and Scatter File


VIVO Y17s is a MediaTek device Preloader file is allowed you to flash and unlock your device by any tool. the file is tested and check on many devices, today I have a link for download the file and fixed your device and recover from FRP, Userlock and flash device.

Flashing VIVO Y17s Using SP Flash Tool


Download and Install Mediatek Driver Autoinstaller

If Mediatek Driver is already installed on your computer, skip this step.

Otherwise, download and install the driver.

Download Stock ROM

Download the Stock ROM (firmware) for your Mediatek Device.

Extract the downloaded firmware on your computer.


Download and Extract SP Flash Tool


Download SP Flash Tool and extract it on your computer.

You should see the following files after extraction:

SP Flash Tool Extracted Files


Launch SP Flash Tool

Open
to launch the tool.

Load Scatter File

Click on the Scatter-Loading Button.

Locate and select the Scatter File from the firmware folder.
Click the Open button.

Start Flashing Process

Click on the Download Button to begin the flashing process.

Connect Device to Computer

Connect your Mediatek Device to the computer using a USB cable (ensure the device is powered off).

After connecting, press the Volume Down or Volume Up key for the tool to detect the device.

Flashing Process

Once the computer detects your device, the flashing process will start automatically.

Completion

A Green Ring will appear at the end of the flashing process.

Close SP Flash Tool and disconnect the device.

Success

You have successfully flashed or installed Stock Firmware on your Mediatek device.

Removing FRP (Factory Reset Protection) on VIVO Y17s


Open SP Flash Tool

Launch the SP Flash Tool on your computer.

Load Scatter File

Load the scatter file for your device.

ypass the Auth

Bypass the authorization requirement.

Go to Format Tab

Select the Format tab in SP Flash Tool.

Manual Format Flash

Choose the "Manual Format Flash" option.

Set Format Addresses

Enter the following addresses:

Begin Address [HEX]:

0x7508000

Format Length [HEX]:

0x100000

Start Formatting

Click on the Start button to begin the formatting process.


Download Link

VIVO Y17s Preloader + Scatter  File

Post a Comment

0 Comments